3G network closure: why don’t I get 4G or 5G coverage? (2024)

However, some customers might find that they could access 3G at a location but can’t access 4G or 5G at the same spot.

There are a few reasons why your experience may have changed.

Make sure you’re using an equivalent device

3G network closure: why don’t I get 4G or 5G coverage? (1)

The most common reason we’re seeing is when someone is not using an equivalent 4G enabled device.

This could mean for example, if you were using a 3G Blue Tick device or a 3G Telstra Go repeater, you'll need to switch to a 4G version of these devices. Not all 4G devices achieve the same level of network performance, so if you’re accessing the 4G network on the fringe of our coverage footprint, opting for a Blue Tick device or Telstra Go repeater can make the difference between being able to access the network and not.

If your device operated on both 3G and 4G, make sure in the device’s settings that it is set for 4G, to access our mobile network coverage.

Additionally, a 4G device purchased overseas or a refurbished international model might not work on our primary mobile network coverage frequency (700MHz). If this is the case, it will result in reduced coverage. You can always check if you’ve got one of these devices by sending an SMS to ‘3’ to ‘3498’ (3GXT) and we’ll let you know.

It’s also worth keeping in mind that, like any modern technology, newer mobile devices have updated features that can improve your experience. They have faster processors, better antennas, and can use the latest networks, which means faster internet and less delay. They also have longer-lasting batteries and better security, making the connection more stable and reliable.

Place your device where you always have

The placement of your device matters – especially when you’re on the fringes of the coverage footprint where every little bit helps. If your 3G device was mounted above the dashboard in your vehicle, make sure your 4G device is mounted there too. Similarly, if you have an external antenna be sure to keep placement consistent. This ensures that the device can access the network effectively.

You might have been accessing our 3G network outside of our advertised coverage footprint

Another possibility is that you were previously accessing our 3G network from outside our advertised coverage footprint as shown on our coverage maps.

This coverage wasn't included in our maps because it's vulnerable to various factors that affect wireless signals. These factors include minor changes in customer use or device types, local vegetation growth, the appearance of new buildings, user traffic, and network optimisation and management.

Because you’re not accessing coverage from within the advertised coverage footprint, we can’t guarantee the reliability of the service. However, using a Blue Tick device and a Telstra Go Repeater can be helpful.

While our coverage maps show where coverage is usually available, the quality of your experience using our mobile network can be affected by the number of people using the network, the type of device you’re using, and the performance of things beyond our control like the website you are looking at or service you’re using.

Signal bars don't tell the full story

Signal bars on devices can be misleading when comparing coverage across different devices or mobile technologies. There are no universal standards for signal bars, so the same signal might show more or fewer bars on different devices. Additionally, 4G is designed to operate with a lower signal level than 3G, which means it may display fewer bars for the same or better level of service.

How we can help

It's been less than a month since we flicked the switch, and since then we've re-purposed spectrum at thousands of mobile sites across the nation, improving mobile network capacity and performance in many regional towns and communities.

We have a specialist team set up to help troubleshoot with you to understand why your experience has changed and how it can be fixed. If you require any support please call us, visit us in store or chat to us online.

By Channa Seneviratne

Executive - Technology Engagement Advancement

Channa Seneviratne is the Executive - Technology Engagement Advancement, which is home to the Centres of Expertise for network technology innovation, technology strategy & architecture, the Chief Data Office, data scientists, data engineers, solutions engineering, and technical product owners and delivery competencies. Channa has more than 30 years of experience in telecommunications networks having worked in both Operations and Engineering across both fixed and wireless technologies. During his time in Telstra, Channa has played key engineering design, support and operational roles as Telstra moved from being a start up in wireless through the evolutions of 2G, CDMA, 3G, 4G and now into readiness for 5G. More recently Channa led the launch of the world’s first commercial gigabit LTE network, the activation of Australia’s largest IoT footprint through our Cat M1 and Narrowband IoT technology and the beginning of our 5G network deployment. Channa has a Bachelor of Engineering from the University of Queensland. Away from work Channa enjoys travel, sport, wildlife photography and spending time with his two young daughters.

3G network closure: why don’t I get 4G or 5G coverage? (2024)

References

Top Articles
Latest Posts
Recommended Articles
Article information

Author: Msgr. Refugio Daniel

Last Updated:

Views: 5656

Rating: 4.3 / 5 (54 voted)

Reviews: 93% of readers found this page helpful

Author information

Name: Msgr. Refugio Daniel

Birthday: 1999-09-15

Address: 8416 Beatty Center, Derekfort, VA 72092-0500

Phone: +6838967160603

Job: Mining Executive

Hobby: Woodworking, Knitting, Fishing, Coffee roasting, Kayaking, Horseback riding, Kite flying

Introduction: My name is Msgr. Refugio Daniel, I am a fine, precious, encouraging, calm, glamorous, vivacious, friendly person who loves writing and wants to share my knowledge and understanding with you.